The Applewin Apple II Emulator for Windows has been updated. Applewin 1.30.18, curated by Tom Charlesworth, was released with a number of changes and bug fixes including the following:
- [Change #1272] New HDC firmware v2 to support returning HDD size in Y:X for status call. [@peteri]
- [Change #1277] Add (debug) cmd line switch to revert to HDC firmware v1: -hdc-firmware-v1.
- [Change #1279] Support Saturn RAM card in slot 3 for any Apple II model (for Robo Systems’ RoboCAD 2).
- [Change #1159] Speaker: change from mono to stereo sound buffer.
- [Change #1247] Robocom’s Interface Module dongle: use actual values for 1000 & 1500 series dongles.
- [Bug #1261] Fix for $C010 which should not read the keyboard latch on Apple II and Apple II+.
- [Bug #1257] 6502/65C02: Fix JSR for edge-case where JSR ABS16 is on stack and SP points to ABS16!
- [Bug #1276] Phasor in Echo+ mode: fix the chip-select polarity.
Applewin is a full fledged freely downloadable Apple II emulator that includes support for a number of features including Peripheral cards and add-on hardware supported:
- Mockingboard, Phasor and SAM sound cards
- Disk II interface for floppy disk drives
- Hard disk controller
- Super Serial Card (SSC)
- Parallel printer card
- Mouse interface
- Apple IIe Extended 80-Column Text Card and RamWorks III (8MB)
- RGB cards: Apple’s Extended 80-Column Text/AppleColor Adaptor Card and ‘Le Chat Mauve’ Féline.
- CP/M SoftCard
- Uthernet I and II (ethernet cards)
- Language Card and Saturn 64/128K for Apple II/II+ (and Saturn 128K for any Apple II in slot 3)
- 4Play and SNES MAX joystick cards
- VidHD card (functionality limited to IIgs’ Super Hi-Res video modes)
- No Slot Clock (NSC)
- Game I/O Connector copy protection dongles
You can download the latest version of the Applewin Apple II emulator from the Applewin Github page at:
https://github.com/AppleWin/AppleWin
