Tag: applewin
The Applewin Apple II Emulator has been updated. Applewin 1.29.8 was released with the following updates and changes: [Bug #749] Hotkeys to change emulation speed using Ctrl+n: now ignored if ALT is pressed. [Bug #748] DiskII: data latch returns a rand() value when no disk is in drive. [Bug #746] Debugger: correctly repaint Apple II screen when showing it from debugger. [Bug #745] WOZ: Support for large tracks. [Bug #743] Added new command line switches: -left-alt-control-buttons : left-ctrl=button0, left-alt=button1 -right-alt-control-buttons : right-alt=button0, right-ctrl=button1 -swap-buttons :…
Applewin Apple II Emulatorhas been updated. Verion 1.29.7 has been released and fixes a host of bugs. Some of the changes included are as follows: [Change #726] Disk II card: supported in slot 5 via ‘-s5 diskii’ command line. [Change #737] Debugger: Changed ‘cycles’ to show the cycle delta since the step/breakpoint etc. [Bug #740] Debugger: gr/hgr/dgr/dhgr commands will honour the state of the MIXED mode. [Bug #733] Fixed WOZ ‘Wasteland’ and also NIB ‘Wasteland’. [Bug #451] Debugger: fix for BPM[R|W] triggering on control-flow instructions’…
The Applewin Apple II Emulator for Windows has been updated. Applewin is a highly developed Apple II emulator managed by by Tom Charlesworth along with a host of other developers. Applewin version 1.29.6 is a major bug fix release with the following changes made to the program: [Bug #724] Fixed so that 6502 interrupt is delayed by 1 opcode when interrupt occurs on last cycle of opcode. [Bug #711] Fixed Mockingboard initial “stretched” music playback (regression introduced at 1.28.7.0). [Bug…
The Applewin Apple II Emulator has been updated. Version 1.29.4 was released with a variety of fixes including: [Change #702] Debugger: In soft-switch display (row-80), show a red ‘x’ when AltZP (and AltLC) is enabled. [Change #666] Debugger: When video-scanner position is off-screen then show v,h as yellow (was red). [PR #710] Debugger: Added BPMR and BPMW to break on a read or write (respectively) to a memory address or range. The Applewin Github Site You can download the Applewin…
The latest version of the Applewin Apple II Emulator has been released. Tom Charlesworth, curator of the Applewin project, released version 1.29.3 with a slew of fixes and changes to the emulator including: [Change #692] Added command line switch to unplug HDD controller card on exit: [Change #689] Added command line switches to set CPU speed and machine type: [Change #666] Debugger: support showing video v,h and cycle count. [Bug #700] Fixed ProDOS8 2.5.0 alpha6: [Bug #695] Fixed WOZ ‘Taipan’…
The Applewin Apple II emulator has been updated. Applewin version 1.29.2.0 was released with a bevy of updates and fixes including: [Change #678] Hotkeys to change emulation speed: [Change #671] Register .woz extension with AppleWin. Updated AppleWin.chm & DELREG.INF. [Bug #685] Fixed support for French Touch’s “CHIP” demo (Mockingboard / multi-TIMER interrupt support). [Bug #677] Loading a save-state wasn’t restoring the pending IRQ. [Bug #672] For WOZ images: all even disk I/O read accesses will now read the data latch….
The Applewin Apple II Emulator has been updated. Version 1.29.1.0 was released with the following changes to the emulator: Fixed WOZ ‘Wizardry III’ not booting. Fixed WOZ ‘Space Quest I’ not booting reliably. Fixed PAGE2 not displaying correctly when in full-speed mode. Applewin is a Windows based Apple II emulator and should run on nearly every Windows platform. You can download the latest version of the Applewin emulator as well as all of the source code from the Github page…
Applewin, the Apple II emulator for Windows machines, now has support for John Morris’ WOZ Format. The Applewin emulator is curated by Tom Charlesworth and a host of other well known Apple II community programmers. Changed in the latest release, version 1.29.0.0 include: WOZ1 and WOZ2 formats supported. read-only: images forced to write-protected (so ‘Stickybear Town Builder’ doesn’t work). only 5.25″ (not 3.5″). known issues: ‘Wizardry III’ not booting. You can download the latest version of the Applewin emulator as…
The Applewin Apple II Emulator for Windows has been updated. Version 1.28.5.0 was released with a host of video related fixes and changes including the following: [Change #631] Improvements for the RGB AppleColor card: Relax the video-mode precondition to just ignore if VF_MIXED (previously required HIRES on) for Apple II Desktop. Changing from DHGR B&W mode to HGR remains in B&W (color burst is off). For ‘50% scan lines’, don’t blend in NTSC B&W mode, as this was inconsistent with…
The Applewin Apple II Emulator has been updated. Version 1.28.4 was released as a bug fix with the following changes to the emulator: [Change #616] Improved accuracy for ‘RGB (Color Monitor)’ for hires. [Bug #611] Holding down F9 to cycle through the video modes results in occasional flicker with garbage. [Bug #627] Rainbow demo not working correctly when vertical blend is enabled. [Bug #628] Filename suffix check for .gz and .zip needs to be case-insensitive. Applewin is for Windows based…
The Applewin Apple II Emulator has been updated. Version 1.28.2 was released today with a few changes and fixes. According to the Github, these include the following: [Change #616] Support vertical blending for ‘RGB (Color Monitor)’ for hires. Support the old AppleWin 1.25 vertical blending for hires via a ‘Vertical Blend’ checkbox. [Change #621] Support RGB AppleColor card’s 160-color pixel mode by squashing 640 pixels into 560 pixels. Squashing is done by losing every 8th pixel. [PR #623] Do not…
The Applewin Apple II Emulator has been updated. Version 1.28.1 has been released and is primarily a bug fix release. Items changed in this release include : [Change #523] Support Extended 80-Column Text/AppleColor Card’s DHGR Mixed mode and 560×192 Mono mode. [PR #620] Corrected a few symbol names in APPLE2E.SYM for the 80STORE and 80COL I/O addresses. [Bug #617] Apple II,II+ keyboard: up/down arrow keys are now ignored. The Applewin project is currently being maintained by Tom Charlesworth and a…
The Applewin Apple II Emulator has been updated. Applewin is an Apple II emulator for Windows based systems and should run on just about any of the newer Windows operating systems. Version 1.28.0.0 was released as a major release and has the following changes in the program: [Change #357] Resurrected the AppleWin 1.25 “Color (Standard)” video mode as “Color (RGB Monitor)”. This is equivalent to emulating RGB video, ie. a video mode with sharp text and pixels. NB. Unlike AppleWin…
The Applewin Apple II Emulator has been updated. Applewin version 1.27.12.0 includes a few changes to the program including: [Change #574] Add support for PAL/European or custom 8K video ROMs: Added new command line switch: -videorom <file> Replaces the video ROM for the Enhanced //e. Support video ROM sizes of 4K, 8K and 16K (top 8K only). NB. The rocker switch is set to the European video ROM position. F10 (for //e or Enhanced //e models) emulates the PAL //e’s…
The Applewin Apple II Emulator has been updated. Version 1.27.10.0 has been released by Tom Charlesworth, curator of the Applewin project. Included in this update are the following items: [Change #590] Apple II original: default to 48K (so no LC installed in slot-0). Added new command line switch: -s0 <languagecard|lc> (‘lc’ is an alias for ‘languagecard’) When LC is in slot-0, it now use the Apple II+’s F8 (auto-start) ROM [Change #408] Support Saturn 64K and 128K cards in slot-0….
The Applewin Apple II Emulator for Windows has been updated. Version 1.27.7.0 has been posted by Applewin’s curator, Tom Charlesworth. Included in this update are the following bug fixes: [Bug #564] Fixed ‘Save State on Exit’ not working correctly when there’s a Configuration change to the hardware. [Bug #556] Reverted default so that ALT+TAB is not hooked Support new command line switch: -hook-alt-tab to support hooking ALT+TAB. [Bug #558] Reverted default so that ALT GR’s fake LEFT CONTROL is not…
The Applewin Apple II Emulator has been updated. Version 1.27.6.0 of Applewin, is primarily a maintenance release which addresses a few bugs including [Bug #570] Fixed lag when repeat-stepping in debugger. [Bug #558] Fixed ClosedApple + <key> not working (when using right ALT key). Applewin is made for the Windows operating system and can be downloaded for free from the Applewin Github releases page at: https://github.com/AppleWin/AppleWin/releases
The Applewin Apple II Emulator has been updated. Verison 1.27.5.0 is now available to all users. This update of Applewin includes a host of bug fixes including the following: [Bug #567] Fixed Mockingboard/6522: Reading the 6522’s IER now returns 0x80|IER. [Bug #556] Allow system key combinations to be read: Open Apple (left ALT) + ESC/SPACE/TAB. Also fixes #145, #198, #448. Support new command line switches: -no-hook-system-key, -alt-enter=<open-apple-enter|toggle-full-screen> Fix for save-state which wasn’t correctly saving last key. [Bug #555] Reverted 1.27.4’s…
The Applewin Emulator has been updated to Version 1.27.4.0. This version focuses on items related to the Super Serial Card and the recent interest in BBS and Modem related topics. The latest release of Applewin includes a host of improvements and fixes including: Fix for showing 559th DHGR vertical column. But now an HGR HCOLOR=2 vertical line at column 0 is only 1 DHGR pixel wide. Fix TEXT80 to be aligned with DHGR. Fix FLASH in TEXT80 (the inverse aux-memory…
The latest release of the Applewin emulator is now available. Version 1.27.2.0 of Applewin includes a host of updates including: [Change #522] SSC: Support ACIA’s TX Empty interrupt for both COM and TCP modes. [Change #311] SSC: Support ACIA’s CTS/RTS. [Bug #308] Fixed TCP mode which was only generating an IRQ for first byte received. SSC: Fixed reading DIPSW registers. SSC: Support ACIA’s Program Reset (write to register 9). SSC: Improved logging for unsupported modes (Echo, Tx break signal). Changes…
